Respiratory Protective Equipment (RPE) Guideline

Respiratory protective equipment (RPE) is a type of personal protective equipment (PPE) that protects people from breathing in substances hazardous to health. This quick guide is for persons conducting a business or undertaking (PCBUs) and it explains some factors to consider when providing your workers with RPE. As an employer you must ensure the health and safety of workers, and that others are not put at risk from your work. You must eliminate risks so far as is reasonably practicable, and where this is not possible you must minimize them. You also must monitor the health of workers and workplace conditions to ensure workers aren’t injured or made ill ( lung infection ) by their work so far as is reasonably practicable.

Also Read: photo-of-the-day-personal-protective-equipment-last-resort

Managing risks using RPE

When managing risks arising from respiratory hazards, you should apply the most appropriate and effective control measures that are reasonably practicable. Give preference to control measures that protect multiple people at once. Personal protective equipment (PPE) such as RPE shouldn’t be the first or only control measure you consider.

Providing workers with RPE is not a quick and easy fix – it can be costly to maintain and replace. Over time, engineering control measures such as local exhaust ventilation may be more cost-effective. However, if you intend to use RPE to minimize a work risk, there are factors that you should consider when selecting the most appropriate RPE in your circumstances.

If workers are working in a dangerous environment such as a confined space, they will need to use the appropriate RPE to keep them safe. See our guidance on confined spaces for more information.

Employer’s duties in relation to RPE

If you use PPE such as RPE to minimize health and safety risks, you have duties you must meet:

Employers must not levy or charge workers for anything done or provided for health and safety – this includes RPE.

The PCBU who directs the carrying out of work must provide RPE to workers unless another PCBU provides it or the worker genuinely and voluntarily chose to provide their own RPE (and you are satisfied the RPE is suitable).

The RPE must be suitable for the work (and its hazards), be a suitable size and fit, and be compatible with other PPE as well as reasonably comfortable.

The RPE must be kept clean, hygienic, and in good working order. It must be maintained, repaired, or replaced so it continues to minimize the risk.

Employers must provide information, training or instruction to workers about how to correctly use, wear, store, and maintain the RPE.

You must ensure, so far as is reasonably practicable, workers or other persons at the workplace use or wear the RPE. The workers or other persons must use or wear the RPE in accordance with any information, training, or reasonable instruction given by you.

Selecting suitable RPE

Types of respirators include:

Respirators use filters to remove contaminants from the air the wearer breathes. These can be:

disposable (commonly referred to as dust masks). These are designed for short term or one-off use. They are only available to protect the wearer from harmful particles such as dust, fume, and fibers.

reusable. They can come in half-face and full-face versions, with the wearer able to choose the correct cartridge for protection from a variety of contaminants.

Powered air-purifying respirators (PAPRs) where contaminated air is forced by a powered fan through filters to provide purified air for the wearer.

Supplied air respirators that provide a supply of clean air from a source such as a cylinder or air compressor. When using a supplied-air respirator, a competent person (like an occupational hygienist) should check the air supply. They should check that:

the capacity of any air service is calculated on a minimum of 170 liters per minute continuous flow for each person measured at the respirator

the air temperature is at a comfortable breathing temperature (15-25 degrees Celsius)

stale air, irritating ingredients and odors, scale, rust, water, and oil mist are not present in the air pipelines

there is a warning device installed to warn when air quality presents a risk (if there is no secondary air supply)

compressors are well maintained, and oil-free if practicable

air intake to compressors is located in an uncontaminated atmosphere

air supply used in both the manufacturing process as well as for the supply of respirable air will not contaminate air used for breathing

levels of oxygen, carbon monoxide, carbon dioxide, oil, and water present will not put the wearer of the respirator at risk.

The air quality for supplied-air respirators should comply with NZS 1715. If you are unsure about air quality when using a supplied-air respirator, check with a competent person.

Figure 1 shows common types of RPE.

The RPE that you provide workers must be suitable and fit the worker.

The selection of RPE will usually require expert help. When selecting RPE think about the following:

What type of RPE will protect against the substance hazardous to health?

Is the RPE suitable for the form of the contaminant (eg mist, gas or solid)?

Is the RPE suitable for the work (light or heavy work, short or long duration, confined space, ventilation)?

The needs of each worker. For example, is the RPE the right size? Is it compatible with other PPE that workers need to wear? If the RPE needs to be worn for extended periods, what are the reasonably comfortable options?

What control measures does the Safety Data Sheet (SDS) for the substance you are working with recommend?

What type of respirator does the Safety Data Sheet (SDS) recommend should be used?

You should choose a filtering respirator based on information about the airborne concentration of the contaminant. Knowing this information will ensure that you are using the correct protection factor (the degree of protection that the respirator provides).

Selecting the right RPE can be confusing; you can get advice from occupational hygienists and suppliers of RPE to make sure you provide your workers with the right protection.

Always choose RPE that complies with or meets the requirements of the AS/NZS standard.

Talk to workers to get their views on which RPE to choose.

What else to know about wearing respirators

Wearing any type of respirator could physically or mentally stress workers.

For example:

Workers could feel claustrophobia, isolation, or anxiety when wearing a helmet, hood, or full facepieces. Training programs may help to overcome these feelings.

Non-powered air-purifying RPE can impose an extra burden on the heart and lungs – especially for workers who wear RPE for long periods and suffer from:

emphysema

asthma

heart disease

anemia

epileptic seizures

claustrophobia

a facial injury or dental treatment etc that affects how well the facepiece seals to the face.

If relevant, you should request workers undergo a medical examination to check that they’re able to wear a respirator.

Further medical assessments may be needed (eg if a worker reports signs or symptoms that affect the ability to use a respirator, information is gained during fit testing that may indicate it).

FILTERS

There is no overall rule about when filters on respirators should be changed – each situation will be different. You should ask the manufacturer, or a competent person, about when and how filters should be changed. Using subjective tests to decide when a filter needs to be changed carries the following risks:

Particulate filters: the filters’ performance may be degraded without a noticeable increase in breathing resistance, therefore clogging will not give adequate guidance for filter replacement. Build-up can be highly variable, and there may be more resistance to breathing when the air is damp.

Gas filters: changing filters based on smell and taste tests is not always a reliable approach for several reasons. These include:

the ability to smell a chemical is highly variable between people

some people can’t detect certain smells

some chemicals like hydrogen sulfide cause the nose to stop detecting the gas when the levels become high and dangerous

peoples’ sense of smell may diminish temporarily e.g. when they have a cold

some substances do not have an odor e.g. carbon monoxide.

Fit testing

Fit testing ensures that workers are wearing proper fitting RPE. As facial characteristics vary from person to person, it’s unlikely that one model or size of RPE will fit everyone. The RPE must be appropriate for the size of the face. In addition, some types of RPE (such as negative pressure respirators – those where you suck air through a filter cartridge) must give a tight seal around the face to be effective.

Fit testing can be either qualitative (smell or taste tests) or quantitative (involving specialized equipment). Fit testing can also be a useful training exercise to teach workers how to wear their RPE correctly.

You should:

arrange for fit testing if your workers are using respirators that need a tight seal. You can usually arrange these with your RPE supplier and fit testing should be conducted when you first provide RPE to workers. Testing is often included in the RPE price

ensure every worker has a fit test for each piece of RPE they use

engage a competent person to conduct a qualitative fit test

repeat fit testing at least yearly or if there is a significant change in the wearer’s facial characteristics (eg change in weight, substantial dental work), as per recommendations in AS/NZS 1715:2009.

Note: Facial hair and stubble (even one day’s growth) make it almost impossible to get a good seal. If your workers have beards you will need to consider providing other forms of RPE that do not rely on a tight face fit. Jewelry, glasses, long hair, and makeup can also compromise face fit.

Read Also : how-to-select-the-right-type-of-respirators-the-basic-types

Using RPE

Workers should visually check their RPE for signs of damage before each use. Workers must tell you of any RPE damage or defect that they become aware of. Workers must tell you when they become aware the RPE needs to be cleaned or decontaminated.

RPE should not be taken off when inside a hazardous area – even if only for a short time, and should be put on before entering the hazardous work area.

Respirators that need a tight fit

If your workers are using RPE that needs a tight fit, ensure they check it fits properly before entering a hazardous area. There are two ‘fit checks’ they should do.

If the wearer’s safety glasses fog up when wearing a half-face respirator, this indicates there’s a leak at the top of the respirator.

Training

Your workers must be trained to use and look after (eg clean, maintain and store) their RPE properly. Get a competent person such as a consultant, an experienced in-house worker, or a representative from an RPE manufacturer or supplier to deliver the training.

Training should refer to the manufacturer’s instructions and cover the following topics:

the hazards, risks, and effects of exposure to the harmful substance, and why workers need RPE

the likely health effects if RPE is not worn

how it works

why fit testing is necessary

how to wear and fit check RPE

when and how to replace filters/cartridges

how to clean and store RPE (Note: Disposable RPE should not be cleaned.)

workers’ health and safety responsibilities.

Workers should be told what the limitations of the RPE are.

Regularly review training to ensure worker awareness remains high.

Health monitoring

Health monitoring is a way to check if the health of workers is being harmed from exposure to hazards while carrying out work, and aims to detect early signs of ill-health or disease. Health monitoring can show if control measures are working effectively. Monitoring does not replace the need for control measures to minimize or prevent exposure.

The GRWM Regulations require health monitoring in certain circumstances.

You must monitor workers’ health when:

a worker is carrying out ongoing work involving a substance hazardous to health (if that substance is specified in a safe work instrument as requiring health monitoring) and

there is a serious risk to workers’ health because of exposure to that substance.

However, even if you do not need to monitor under these regulations, you still have a primary duty under the Health and Safety at Work Act 2015 to monitor worker health, so far as is reasonably practicable, if exposure to a particular health risk warrants it. Health monitoring is important for workers who wear PPE/RPE to check that they’re not being exposed to a health risk.

Talk to your workers to get their views about health monitoring.

For advice about health monitoring contact an experienced occupational health professional.

Recording and reviewing your respiratory protection program

We recommend you keep written records about your respiratory protection program (which covers the selection, training, and use of RPE, and any health monitoring).

Your respiratory protection program needs to be reviewed regularly to check that your requirements are still being met. Keep track of all changes made as a result of the reviews.

PCBU checklist for your respiratory protection program

Have you undertaken a risk assessment for your work?

Have you put control measures in place?

Do you have a system for reviewing risks and ensuring the control measure is working?

Do you involve your workers in risk management?

Do your workers know about the risks associated with the substances they work with or that are generated by the work?

Have you assessed the nature of the risks identified and had a qualified person determine the exposure?

Have you carried out fit testing for your workers who will be wearing RPE?

Have you trained workers on the correct use of the RPE (with reference to the manufacturer’s guidelines)?

Do workers know when to change a gas or particulate cartridges? (if relevant)

Have you documented this in their personnel record?

Do you have a process in place for the issue and maintenance of RPE?

Have you made somebody responsible for your respiratory program?

Also Read: https://hsseworld.com/e-booksguide-for-the-respiratory-protection-standard

Continue Reading